Модуль managed-clickhouse: кастомные ресурсы

ClickhouseClass

Scope: Cluster
Version: v1alpha1

• apiVersion

  строка

  APIVersion определяет версионную схему этого представления объекта. Серверы должны преобразовывать распознанные схемы в последнее внутреннее значение и могут отклонять нераспознанные значения. Подробнее: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources
• kind

  строка

  Kind — это строковое значение, представляющее REST-ресурс, который представляет этот объект. Серверы могут определить это из конечной точки, на которую клиент отправляет запросы. Не может быть обновлено. В CamelCase. Подробнее: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds
• metadata

  объект
• spec

  объект

  ClickhouseClassSpec определяет желаемое состояние ClickhouseClass. Cluster-wide-ресурс для администратора, который задаёт политики sizing, правила валидации и ограничения планирования для экземпляров Clickhouse.
  • spec.nodeAffinity

    объект

    Node affinity подов сервиса
    • spec.nodeAffinity.preferredDuringSchedulingIgnoredDuringExecution

      массив объектов

      Планировщик предпочтёт размещать поды на узлах, которые удовлетворяют выражениям affinity, указанным в этом поле, но может выбрать узел, нарушающий одно или несколько выражений. Наиболее предпочтительный узел — с наибольшей суммой весов.
      • spec.nodeAffinity.preferredDuringSchedulingIgnoredDuringExecution.preference

        объект

        Условие селектора узла, связанное с соответствующим весом
        • spec.nodeAffinity.preferredDuringSchedulingIgnoredDuringExecution.preference.matchExpressions

          массив объектов

          Список требований селектора узла по лейблам узла
          • spec.nodeAffinity.preferredDuringSchedulingIgnoredDuringExecution.preference.matchExpressions.key

            строка

            Ключ лейбла, к которому применяется селектор
          • spec.nodeAffinity.preferredDuringSchedulingIgnoredDuringExecution.preference.matchExpressions.operator

            строка

            Отношение ключа к набору значений.

            Поддерживаемые операторы: In, NotIn, Exists, DoesNotExist, Gt, Lt.

          • spec.nodeAffinity.preferredDuringSchedulingIgnoredDuringExecution.preference.matchExpressions.values

            массив строк

            Массив строковых значений в зависимости от оператора:

            • при In или NotIn массив не должен быть пустым;
            • при Exists или DoesNotExist массив должен быть пустым;
            • при Gt или Lt массив должен содержать один элемент — целое число.
        • spec.nodeAffinity.preferredDuringSchedulingIgnoredDuringExecution.preference.matchFields

          массив объектов

          Список требований селектора узла по полям узла
          • spec.nodeAffinity.preferredDuringSchedulingIgnoredDuringExecution.preference.matchFields.key

            строка

            Ключ лейбла, к которому применяется селектор
          • spec.nodeAffinity.preferredDuringSchedulingIgnoredDuringExecution.preference.matchFields.operator

            строка

            Отношение ключа к набору значений.

            Поддерживаемые операторы: In, NotIn, Exists, DoesNotExist, Gt, Lt.

          • spec.nodeAffinity.preferredDuringSchedulingIgnoredDuringExecution.preference.matchFields.values

            массив строк

            Массив строковых значений в зависимости от оператора:

            • при In или NotIn массив не должен быть пустым;
            • при Exists или DoesNotExist массив должен быть пустым;
            • при Gt или Lt массив должен содержать один элемент — целое число.
      • spec.nodeAffinity.preferredDuringSchedulingIgnoredDuringExecution.weight

        целочисленный

        Вес сопоставления с соответствующим nodeSelectorTerm, в диапазоне 1–100
    • spec.nodeAffinity.requiredDuringSchedulingIgnoredDuringExecution

      объект

      Если требования affinity не выполнены во время планирования, под не будет размещён на узле. Если требования перестают выполняться во время работы пода, система может попытаться вытеснить под с узла.
      • spec.nodeAffinity.requiredDuringSchedulingIgnoredDuringExecution.nodeSelectorTerms

        массив объектов

        Обязательный параметр

        Список условий селектора узла. Условия объединяются по логике «ИЛИ»
        • spec.nodeAffinity.requiredDuringSchedulingIgnoredDuringExecution.nodeSelectorTerms.matchExpressions

          массив объектов

          Список требований селектора узла по лейблам узла
          • spec.nodeAffinity.requiredDuringSchedulingIgnoredDuringExecution.nodeSelectorTerms.matchExpressions.key

            строка

            Ключ лейбла, к которому применяется селектор
          • spec.nodeAffinity.requiredDuringSchedulingIgnoredDuringExecution.nodeSelectorTerms.matchExpressions.operator

            строка

            Отношение ключа к набору значений.

            Поддерживаемые операторы: In, NotIn, Exists, DoesNotExist, Gt, Lt.

          • spec.nodeAffinity.requiredDuringSchedulingIgnoredDuringExecution.nodeSelectorTerms.matchExpressions.values

            массив строк

            Массив строковых значений в зависимости от оператора:

            • при In или NotIn массив не должен быть пустым;
            • при Exists или DoesNotExist массив должен быть пустым;
            • при Gt или Lt массив должен содержать один элемент — целое число.
        • spec.nodeAffinity.requiredDuringSchedulingIgnoredDuringExecution.nodeSelectorTerms.matchFields

          массив объектов

          Список требований селектора узла по полям узла
          • spec.nodeAffinity.requiredDuringSchedulingIgnoredDuringExecution.nodeSelectorTerms.matchFields.key

            строка

            Ключ лейбла, к которому применяется селектор
          • spec.nodeAffinity.requiredDuringSchedulingIgnoredDuringExecution.nodeSelectorTerms.matchFields.operator

            строка

            Отношение ключа к набору значений.

            Поддерживаемые операторы: In, NotIn, Exists, DoesNotExist, Gt, Lt.

          • spec.nodeAffinity.requiredDuringSchedulingIgnoredDuringExecution.nodeSelectorTerms.matchFields.values

            массив строк

            Массив строковых значений в зависимости от оператора:

            • при In или NotIn массив не должен быть пустым;
            • при Exists или DoesNotExist массив должен быть пустым;
            • при Gt или Lt массив должен содержать один элемент — целое число.
  • spec.nodeSelector

    объект

    Позволяет назначать поды сервиса на указанные узлы. Аналогично параметру spec.nodeSelector для подов Kubernetes.
  • spec.sizingPolicies

    массив объектов

    Обязательный параметр

    Политика допустимых размеров ресурсов
    • spec.sizingPolicies.coreFractions

      массив строк

      Множитель для корректировки requests на основе установленных limits в ядрах

      Пример:

      coreFractions:
      - 10%
      - 30%
      - 50%
      - 100%
      

    • spec.sizingPolicies.cores

      объект

      Допустимый диапазон количества ядер CPU
      • spec.sizingPolicies.cores.max

        целочисленный

        Обязательный параметр

        Верхний предел допустимого количества ядер CPU

        Пример:

        max: 6
        

      • spec.sizingPolicies.cores.min

        целочисленный

        Обязательный параметр

        Нижний предел допустимого количества ядер CPU

        Пример:

        min: 1
        

    • spec.sizingPolicies.memory

      объект

      Допустимый диапазон памяти и шаг
      • spec.sizingPolicies.memory.max

        строка или число

        Обязательный параметр

        Верхний предел допустимого объёма памяти

        Шаблон: ^(\+|-)?(([0-9]+(\.[0-9]*)?)|(\.[0-9]+))(([KMGTPE]i)|[numkMGTPE]|([eE](\+|-)?(([0-9]+(\.[0-9]*)?)|(\.[0-9]+))))?$

        Пример:

        max: 5Gi
        

      • spec.sizingPolicies.memory.min

        строка или число

        Обязательный параметр

        Нижний предел допустимого объёма памяти

        Шаблон: ^(\+|-)?(([0-9]+(\.[0-9]*)?)|(\.[0-9]+))(([KMGTPE]i)|[numkMGTPE]|([eE](\+|-)?(([0-9]+(\.[0-9]*)?)|(\.[0-9]+))))?$

        Пример:

        min: 128Mi
        

      • spec.sizingPolicies.memory.step

        строка или число

        Обязательный параметр

        Шаг допустимого значения памяти. Указанный объём памяти должен быть кратен этому значению.

        Шаблон: ^(\+|-)?(([0-9]+(\.[0-9]*)?)|(\.[0-9]+))(([KMGTPE]i)|[numkMGTPE]|([eE](\+|-)?(([0-9]+(\.[0-9]*)?)|(\.[0-9]+))))?$

        Пример:

        step: 100Mi
        

  • spec.tolerations

    массив объектов

    Tolerations подов сервиса
    • spec.tolerations.effect

      строка

      Эффект taint для сопоставления. Пустое значение — сопоставление со всеми эффектами. Допустимые значения: NoSchedule, PreferNoSchedule, NoExecute.
    • spec.tolerations.key

      строка

      Ключ taint, к которому применяется toleration. Пустое значение — сопоставление со всеми ключами. Если ключ пустой, оператор должен быть Exists.
    • spec.tolerations.operator

      строка

      Отношение ключа к значению. Допустимые операторы: Exists, Equal, Lt, Gt. По умолчанию Equal.
    • spec.tolerations.tolerationSeconds

      целочисленный

      Период времени, в течение которого toleration с эффектом NoExecute переносит taint. По умолчанию не задан — taint переносится бессрочно.
    • spec.tolerations.value

      строка

      Значение taint для сопоставления. При операторе Exists значение должно быть пустым.
  • spec.validations

    массив объектов

    Список правил валидации, применяемых к конфигурации экземпляров Clickhouse
    • spec.validations.message

      строка

      Сообщение, которое будет показано при неудачной проверке rule

      Пример:

      message: The ratio of memory to cpu should be 4:1
      

    • spec.validations.rule

      строка

      Правило валидации конфигурации.

      Доступные предопределённые переменные:

      • instance.memory.size
      • instance.cpu.cores
      • instance.persistentVolumeClaim.size

      Пример:

      rule: instance.memory.size == instance.cpu.cores * 4 * 1024 * 1024 * 1024
      

• status

  объект

  ClickhouseClassStatus определяет наблюдаемое состояние ClickhouseClass

Clickhouse

Scope: Namespaced
Version: v1alpha1

• apiVersion

  строка

  APIVersion определяет версионную схему этого представления объекта. Серверы должны преобразовывать распознанные схемы в последнее внутреннее значение и могут отклонять нераспознанные значения. Подробнее: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources
• kind

  строка

  Kind — это строковое значение, представляющее REST-ресурс, который представляет этот объект. Серверы могут определить это из конечной точки, на которую клиент отправляет запросы. Не может быть обновлено. В CamelCase. Подробнее: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds
• metadata

  объект
• spec

  объект

  ClickhouseSpec определяет желаемое состояние Clickhouse
  • spec.clickhouseClassName

    строка

    Обязательный параметр

    Имя ClickhouseClass, которое должно быть указано для валидации настроек

    По умолчанию: default

    Пример:

    clickhouseClassName: minimal
    

  • spec.instance

    объект

    Обязательный параметр

    Конфигурация экземпляра ClickHouse
    • spec.instance.cpu

      объект

      Обязательный параметр

      Ресурсы CPU экземпляра ClickHouse
      • spec.instance.cpu.coreFraction

        строка

        Обязательный параметр

        Множитель для значений requests относительно limits ядер

        Пример:

        coreFraction: 50%
        

      • spec.instance.cpu.cores

        целочисленный

        Обязательный параметр

        Количество ядер CPU, выделенных экземпляру
    • spec.instance.memory

      объект

      Обязательный параметр

      Ресурсы памяти экземпляра ClickHouse
      • spec.instance.memory.size

        строка или число

        Обязательный параметр

        Лимит памяти экземпляра ClickHouse

        Шаблон: ^(\+|-)?(([0-9]+(\.[0-9]*)?)|(\.[0-9]+))(([KMGTPE]i)|[numkMGTPE]|([eE](\+|-)?(([0-9]+(\.[0-9]*)?)|(\.[0-9]+))))?$

        Пример:

        size: 1Gi
        

    • spec.instance.persistentVolumeClaim

      объект

      Обязательный параметр

      Постоянное хранилище данных ClickHouse
      • spec.instance.persistentVolumeClaim.size

        строка или число

        Обязательный параметр

        Размер постоянного тома для данных ClickHouse

        По умолчанию: 1Gi

        Шаблон: ^(\+|-)?(([0-9]+(\.[0-9]*)?)|(\.[0-9]+))(([KMGTPE]i)|[numkMGTPE]|([eE](\+|-)?(([0-9]+(\.[0-9]*)?)|(\.[0-9]+))))?$

        Пример:

        size: 1Gi
        

      • spec.instance.persistentVolumeClaim.storageClassName

        строка

        Имя класса хранилища, который будет использоваться для экземпляров. Если пусто, будет использован storageClass, отмеченный как стандартный в кластере Kubernetes. Настройка устанавливается один раз и не может быть изменена при обновлении.

        Пример:

        storageClassName: local-path
        

  • spec.tls

    объект

    Настройки серверного TLS для ClickHouse
    • spec.tls.certManager

      объект

      Параметры управления сертификатами через cert-manager. Используется только при mode: CertManager.
      • spec.tls.certManager.clusterIssuerName

        строка

        Имя ClusterIssuer cert-manager. Должно быть указано только одно из полей clusterIssuerName или issuerName.
      • spec.tls.certManager.issuerName

        строка

        Имя Issuer cert-manager в неймспейсе сервиса. Должно быть указано только одно из полей clusterIssuerName или issuerName.
    • spec.tls.customCertificate

      объект

      Ссылки на пользовательские Secret с TLS-сертификатами. Используется только при mode: CustomCertificate.
      • spec.tls.customCertificate.serverCASecret

        строка

        Обязательный параметр

        Ссылка на Secret с ca.crt — центром сертификации, подписавшим serverTLSSecret. Оператор проверяет наличие Secret и ключа ca.crt, но не монтирует его в под сервиса.
      • spec.tls.customCertificate.serverTLSSecret

        строка

        Обязательный параметр

        Ссылка на Secret типа kubernetes.io/tls с tls.crt и tls.key. SAN сертификата должен включать DNS-имя сервиса, иначе клиенты с полной проверкой TLS отклонят сертификат.
    • spec.tls.mode

      строка

      Способ управления серверными TLS-сертификатами.

      CertManager — выпуск через cert-manager. CustomCertificate — пользовательские Secret.

      По умолчанию: CertManager

      Допустимые значения: CertManager, CustomCertificate

• status

  объект

  Наблюдаемое состояние Clickhouse
  • status.conditions

    массив объектов

    Список условий, описывающих текущее состояние экземпляра ClickHouse
    • status.conditions.lastTransitionTime

      строка

      Время последнего перехода условия в новый статус
    • status.conditions.message

      строка

      Человекочитаемое сообщение с подробностями о переходе состояния
    • status.conditions.observedGeneration

      целочисленный

      Наблюдаемое поколение (observed generation)
    • status.conditions.reason

      строка

      Причина последнего перехода состояния
    • status.conditions.status

      строка

      Статус условия — True, False или Unknown
    • status.conditions.type

      строка

      Тип условия
  • status.instancesReportedState

    объект

    Сообщённое состояние каждого пода экземпляра, ключ — имя пода
    • status.instancesReportedState.<KEY_NAME>

      объект

      <KEY_NAME> — имя параметра (ключ объекта).
      • status.instancesReportedState.<KEY_NAME>.configHash

        строка

        Хеш конфигурации, применённой к экземпляру
  • status.lastValidConfiguration

    объект

    Последняя успешно проверенная и применённая конфигурация
    • status.lastValidConfiguration.configuration

      объект

      Пары ключ–значение конфигурации сервера ClickHouse из последней валидной конфигурации
    • status.lastValidConfiguration.instance

      объект
      • status.lastValidConfiguration.instance.cpu

        объект

        Обязательный параметр
        • status.lastValidConfiguration.instance.cpu.coreFraction

          строка

          Обязательный параметр

          Множитель для значений requests относительно limits ядер

          Пример:

          coreFraction: 50%
          

        • status.lastValidConfiguration.instance.cpu.cores

          целочисленный

          Обязательный параметр

          Количество ядер CPU, выделенных экземпляру
      • status.lastValidConfiguration.instance.memory

        объект

        Обязательный параметр
        • status.lastValidConfiguration.instance.memory.size

          строка или число

          Обязательный параметр

          Лимит памяти экземпляра ClickHouse

          Шаблон: ^(\+|-)?(([0-9]+(\.[0-9]*)?)|(\.[0-9]+))(([KMGTPE]i)|[numkMGTPE]|([eE](\+|-)?(([0-9]+(\.[0-9]*)?)|(\.[0-9]+))))?$

          Пример:

          size: 1Gi
          

      • status.lastValidConfiguration.instance.persistentVolumeClaim

        объект
        • status.lastValidConfiguration.instance.persistentVolumeClaim.size

          строка или число

          Обязательный параметр

          Размер постоянного тома для данных ClickHouse

          По умолчанию: 1Gi

          Шаблон: ^(\+|-)?(([0-9]+(\.[0-9]*)?)|(\.[0-9]+))(([KMGTPE]i)|[numkMGTPE]|([eE](\+|-)?(([0-9]+(\.[0-9]*)?)|(\.[0-9]+))))?$

          Пример:

          size: 1Gi
          

        • status.lastValidConfiguration.instance.persistentVolumeClaim.storageClassName

          строка

          Имя класса хранилища, который будет использоваться для экземпляров. Если пусто, будет использован storageClass, отмеченный как стандартный в кластере Kubernetes. Настройка устанавливается один раз и не может быть изменена при обновлении.

          Пример:

          storageClassName: local-path
          

    • status.lastValidConfiguration.scheduling

      объект

      Параметры планирования, применённые к подам ClickHouse
      • status.lastValidConfiguration.scheduling.affinity

        объект

        Affinity is a group of affinity scheduling rules.
        • status.lastValidConfiguration.scheduling.affinity.nodeAffinity

          объект

          Describes node affinity scheduling rules for the pod.
          • status.lastValidConfiguration.scheduling.affinity.nodeAffinity.preferredDuringSchedulingIgnoredDuringExecution

            массив объектов

            The scheduler will prefer to schedule pods to nodes that satisfy the affinity expressions specified by this field, but it may choose a node that violates one or more of the expressions. The node that is most preferred is the one with the greatest sum of weights, i.e. for each node that meets all of the scheduling requirements (resource request, requiredDuringScheduling affinity expressions, etc.), compute a sum by iterating through the elements of this field and adding “weight” to the sum if the node matches the corresponding matchExpressions; the node(s) with the highest sum are the most preferred.
            • status.lastValidConfiguration.scheduling.affinity.nodeAffinity.preferredDuringSchedulingIgnoredDuringExecution.preference

              объект

              A node selector term, associated with the corresponding weight.
              • status.lastValidConfiguration.scheduling.affinity.nodeAffinity.preferredDuringSchedulingIgnoredDuringExecution.preference.matchExpressions

                массив объектов

                A list of node selector requirements by node’s labels.
                • status.lastValidConfiguration.scheduling.affinity.nodeAffinity.preferredDuringSchedulingIgnoredDuringExecution.preference.matchExpressions.key

                  строка

                  The label key that the selector applies to.
                • status.lastValidConfiguration.scheduling.affinity.nodeAffinity.preferredDuringSchedulingIgnoredDuringExecution.preference.matchExpressions.operator

                  строка

                  Represents a key’s relationship to a set of values. Valid operators are In, NotIn, Exists, DoesNotExist. Gt, and Lt.
                • status.lastValidConfiguration.scheduling.affinity.nodeAffinity.preferredDuringSchedulingIgnoredDuringExecution.preference.matchExpressions.values

                  массив строк

                  An array of string values. If the operator is In or NotIn, the values array must be non-empty. If the operator is Exists or DoesNotExist, the values array must be empty. If the operator is Gt or Lt, the values array must have a single element, which will be interpreted as an integer. This array is replaced during a strategic merge patch.
              • status.lastValidConfiguration.scheduling.affinity.nodeAffinity.preferredDuringSchedulingIgnoredDuringExecution.preference.matchFields

                массив объектов

                A list of node selector requirements by node’s fields.
                • status.lastValidConfiguration.scheduling.affinity.nodeAffinity.preferredDuringSchedulingIgnoredDuringExecution.preference.matchFields.key

                  строка

                  The label key that the selector applies to.
                • status.lastValidConfiguration.scheduling.affinity.nodeAffinity.preferredDuringSchedulingIgnoredDuringExecution.preference.matchFields.operator

                  строка

                  Represents a key’s relationship to a set of values. Valid operators are In, NotIn, Exists, DoesNotExist. Gt, and Lt.
                • status.lastValidConfiguration.scheduling.affinity.nodeAffinity.preferredDuringSchedulingIgnoredDuringExecution.preference.matchFields.values

                  массив строк

                  An array of string values. If the operator is In or NotIn, the values array must be non-empty. If the operator is Exists or DoesNotExist, the values array must be empty. If the operator is Gt or Lt, the values array must have a single element, which will be interpreted as an integer. This array is replaced during a strategic merge patch.
            • status.lastValidConfiguration.scheduling.affinity.nodeAffinity.preferredDuringSchedulingIgnoredDuringExecution.weight

              целочисленный

              Weight associated with matching the corresponding nodeSelectorTerm, in the range 1-100.
          • status.lastValidConfiguration.scheduling.affinity.nodeAffinity.requiredDuringSchedulingIgnoredDuringExecution

            объект

            If the affinity requirements specified by this field are not met at scheduling time, the pod will not be scheduled onto the node. If the affinity requirements specified by this field cease to be met at some point during pod execution (e.g. due to an update), the system may or may not try to eventually evict the pod from its node.
            • status.lastValidConfiguration.scheduling.affinity.nodeAffinity.requiredDuringSchedulingIgnoredDuringExecution.nodeSelectorTerms

              массив объектов

              Обязательный параметр

              Required. A list of node selector terms. The terms are ORed.
              • status.lastValidConfiguration.scheduling.affinity.nodeAffinity.requiredDuringSchedulingIgnoredDuringExecution.nodeSelectorTerms.matchExpressions

                массив объектов

                A list of node selector requirements by node’s labels.
                • status.lastValidConfiguration.scheduling.affinity.nodeAffinity.requiredDuringSchedulingIgnoredDuringExecution.nodeSelectorTerms.matchExpressions.key

                  строка

                  The label key that the selector applies to.
                • status.lastValidConfiguration.scheduling.affinity.nodeAffinity.requiredDuringSchedulingIgnoredDuringExecution.nodeSelectorTerms.matchExpressions.operator

                  строка

                  Represents a key’s relationship to a set of values. Valid operators are In, NotIn, Exists, DoesNotExist. Gt, and Lt.
                • status.lastValidConfiguration.scheduling.affinity.nodeAffinity.requiredDuringSchedulingIgnoredDuringExecution.nodeSelectorTerms.matchExpressions.values

                  массив строк

                  An array of string values. If the operator is In or NotIn, the values array must be non-empty. If the operator is Exists or DoesNotExist, the values array must be empty. If the operator is Gt or Lt, the values array must have a single element, which will be interpreted as an integer. This array is replaced during a strategic merge patch.
              • status.lastValidConfiguration.scheduling.affinity.nodeAffinity.requiredDuringSchedulingIgnoredDuringExecution.nodeSelectorTerms.matchFields

                массив объектов

                A list of node selector requirements by node’s fields.
                • status.lastValidConfiguration.scheduling.affinity.nodeAffinity.requiredDuringSchedulingIgnoredDuringExecution.nodeSelectorTerms.matchFields.key

                  строка

                  The label key that the selector applies to.
                • status.lastValidConfiguration.scheduling.affinity.nodeAffinity.requiredDuringSchedulingIgnoredDuringExecution.nodeSelectorTerms.matchFields.operator

                  строка

                  Represents a key’s relationship to a set of values. Valid operators are In, NotIn, Exists, DoesNotExist. Gt, and Lt.
                • status.lastValidConfiguration.scheduling.affinity.nodeAffinity.requiredDuringSchedulingIgnoredDuringExecution.nodeSelectorTerms.matchFields.values

                  массив строк

                  An array of string values. If the operator is In or NotIn, the values array must be non-empty. If the operator is Exists or DoesNotExist, the values array must be empty. If the operator is Gt or Lt, the values array must have a single element, which will be interpreted as an integer. This array is replaced during a strategic merge patch.
        • status.lastValidConfiguration.scheduling.affinity.podAffinity

          объект

          Describes pod affinity scheduling rules (e.g. co-locate this pod in the same node, zone, etc. as some other pod(s)).
          • status.lastValidConfiguration.scheduling.affinity.podAffinity.preferredDuringSchedulingIgnoredDuringExecution

            массив объектов

            The scheduler will prefer to schedule pods to nodes that satisfy the affinity expressions specified by this field, but it may choose a node that violates one or more of the expressions. The node that is most preferred is the one with the greatest sum of weights, i.e. for each node that meets all of the scheduling requirements (resource request, requiredDuringScheduling affinity expressions, etc.), compute a sum by iterating through the elements of this field and adding “weight” to the sum if the node has pods which matches the corresponding podAffinityTerm; the node(s) with the highest sum are the most preferred.
            • status.lastValidConfiguration.scheduling.affinity.podAffinity.preferredDuringSchedulingIgnoredDuringExecution.podAffinityTerm

              объект

              Required. A pod affinity term, associated with the corresponding weight.
              • status.lastValidConfiguration.scheduling.affinity.podAffinity.preferredDuringSchedulingIgnoredDuringExecution.podAffinityTerm.labelSelector

                объект

                A label query over a set of resources, in this case pods. If it’s null, this PodAffinityTerm matches with no Pods.
                • status.lastValidConfiguration.scheduling.affinity.podAffinity.preferredDuringSchedulingIgnoredDuringExecution.podAffinityTerm.labelSelector.matchExpressions

                  массив объектов

                  matchExpressions is a list of label selector requirements. The requirements are ANDed.
                  • status.lastValidConfiguration.scheduling.affinity.podAffinity.preferredDuringSchedulingIgnoredDuringExecution.podAffinityTerm.labelSelector.matchExpressions.key

                    строка

                    key is the label key that the selector applies to.
                  • status.lastValidConfiguration.scheduling.affinity.podAffinity.preferredDuringSchedulingIgnoredDuringExecution.podAffinityTerm.labelSelector.matchExpressions.operator

                    строка

                    operator represents a key’s relationship to a set of values. Valid operators are In, NotIn, Exists and DoesNotExist.
                  • status.lastValidConfiguration.scheduling.affinity.podAffinity.preferredDuringSchedulingIgnoredDuringExecution.podAffinityTerm.labelSelector.matchExpressions.values

                    массив строк

                    values is an array of string values. If the operator is In or NotIn, the values array must be non-empty. If the operator is Exists or DoesNotExist, the values array must be empty. This array is replaced during a strategic merge patch.
                • status.lastValidConfiguration.scheduling.affinity.podAffinity.preferredDuringSchedulingIgnoredDuringExecution.podAffinityTerm.labelSelector.matchLabels

                  объект

                  matchLabels is a map of {key,value} pairs. A single {key,value} in the matchLabels map is equivalent to an element of matchExpressions, whose key field is “key”, the operator is “In”, and the values array contains only “value”. The requirements are ANDed.
              • status.lastValidConfiguration.scheduling.affinity.podAffinity.preferredDuringSchedulingIgnoredDuringExecution.podAffinityTerm.matchLabelKeys

                массив строк

                MatchLabelKeys is a set of pod label keys to select which pods will be taken into consideration. The keys are used to lookup values from the incoming pod labels, those key-value labels are merged with labelSelector as key in (value) to select the group of existing pods which pods will be taken into consideration for the incoming pod’s pod (anti) affinity. Keys that don’t exist in the incoming pod labels will be ignored. The default value is empty. The same key is forbidden to exist in both matchLabelKeys and labelSelector. Also, matchLabelKeys cannot be set when labelSelector isn’t set.
              • status.lastValidConfiguration.scheduling.affinity.podAffinity.preferredDuringSchedulingIgnoredDuringExecution.podAffinityTerm.mismatchLabelKeys

                массив строк

                MismatchLabelKeys is a set of pod label keys to select which pods will be taken into consideration. The keys are used to lookup values from the incoming pod labels, those key-value labels are merged with labelSelector as key notin (value) to select the group of existing pods which pods will be taken into consideration for the incoming pod’s pod (anti) affinity. Keys that don’t exist in the incoming pod labels will be ignored. The default value is empty. The same key is forbidden to exist in both mismatchLabelKeys and labelSelector. Also, mismatchLabelKeys cannot be set when labelSelector isn’t set.
              • status.lastValidConfiguration.scheduling.affinity.podAffinity.preferredDuringSchedulingIgnoredDuringExecution.podAffinityTerm.namespaceSelector

                объект

                A label query over the set of namespaces that the term applies to. The term is applied to the union of the namespaces selected by this field and the ones listed in the namespaces field. null selector and null or empty namespaces list means “this pod’s namespace”. An empty selector ({}) matches all namespaces.
                • status.lastValidConfiguration.scheduling.affinity.podAffinity.preferredDuringSchedulingIgnoredDuringExecution.podAffinityTerm.namespaceSelector.matchExpressions

                  массив объектов

                  matchExpressions is a list of label selector requirements. The requirements are ANDed.
                  • status.lastValidConfiguration.scheduling.affinity.podAffinity.preferredDuringSchedulingIgnoredDuringExecution.podAffinityTerm.namespaceSelector.matchExpressions.key

                    строка

                    key is the label key that the selector applies to.
                  • status.lastValidConfiguration.scheduling.affinity.podAffinity.preferredDuringSchedulingIgnoredDuringExecution.podAffinityTerm.namespaceSelector.matchExpressions.operator

                    строка

                    operator represents a key’s relationship to a set of values. Valid operators are In, NotIn, Exists and DoesNotExist.
                  • status.lastValidConfiguration.scheduling.affinity.podAffinity.preferredDuringSchedulingIgnoredDuringExecution.podAffinityTerm.namespaceSelector.matchExpressions.values

                    массив строк

                    values is an array of string values. If the operator is In or NotIn, the values array must be non-empty. If the operator is Exists or DoesNotExist, the values array must be empty. This array is replaced during a strategic merge patch.
                • status.lastValidConfiguration.scheduling.affinity.podAffinity.preferredDuringSchedulingIgnoredDuringExecution.podAffinityTerm.namespaceSelector.matchLabels

                  объект

                  matchLabels is a map of {key,value} pairs. A single {key,value} in the matchLabels map is equivalent to an element of matchExpressions, whose key field is “key”, the operator is “In”, and the values array contains only “value”. The requirements are ANDed.
              • status.lastValidConfiguration.scheduling.affinity.podAffinity.preferredDuringSchedulingIgnoredDuringExecution.podAffinityTerm.namespaces

                массив строк

                namespaces specifies a static list of namespace names that the term applies to. The term is applied to the union of the namespaces listed in this field and the ones selected by namespaceSelector. null or empty namespaces list and null namespaceSelector means “this pod’s namespace”.
              • status.lastValidConfiguration.scheduling.affinity.podAffinity.preferredDuringSchedulingIgnoredDuringExecution.podAffinityTerm.topologyKey

                строка

                Обязательный параметр

                This pod should be co-located (affinity) or not co-located (anti-affinity) with the pods matching the labelSelector in the specified namespaces, where co-located is defined as running on a node whose value of the label with key topologyKey matches that of any node on which any of the selected pods is running. Empty topologyKey is not allowed.
            • status.lastValidConfiguration.scheduling.affinity.podAffinity.preferredDuringSchedulingIgnoredDuringExecution.weight

              целочисленный

              weight associated with matching the corresponding podAffinityTerm, in the range 1-100.
          • status.lastValidConfiguration.scheduling.affinity.podAffinity.requiredDuringSchedulingIgnoredDuringExecution

            массив объектов

            If the affinity requirements specified by this field are not met at scheduling time, the pod will not be scheduled onto the node. If the affinity requirements specified by this field cease to be met at some point during pod execution (e.g. due to a pod label update), the system may or may not try to eventually evict the pod from its node. When there are multiple elements, the lists of nodes corresponding to each podAffinityTerm are intersected, i.e. all terms must be satisfied.
            • status.lastValidConfiguration.scheduling.affinity.podAffinity.requiredDuringSchedulingIgnoredDuringExecution.labelSelector

              объект

              A label query over a set of resources, in this case pods. If it’s null, this PodAffinityTerm matches with no Pods.
              • status.lastValidConfiguration.scheduling.affinity.podAffinity.requiredDuringSchedulingIgnoredDuringExecution.labelSelector.matchExpressions

                массив объектов

                matchExpressions is a list of label selector requirements. The requirements are ANDed.
                • status.lastValidConfiguration.scheduling.affinity.podAffinity.requiredDuringSchedulingIgnoredDuringExecution.labelSelector.matchExpressions.key

                  строка

                  key is the label key that the selector applies to.
                • status.lastValidConfiguration.scheduling.affinity.podAffinity.requiredDuringSchedulingIgnoredDuringExecution.labelSelector.matchExpressions.operator

                  строка

                  operator represents a key’s relationship to a set of values. Valid operators are In, NotIn, Exists and DoesNotExist.
                • status.lastValidConfiguration.scheduling.affinity.podAffinity.requiredDuringSchedulingIgnoredDuringExecution.labelSelector.matchExpressions.values

                  массив строк

                  values is an array of string values. If the operator is In or NotIn, the values array must be non-empty. If the operator is Exists or DoesNotExist, the values array must be empty. This array is replaced during a strategic merge patch.
              • status.lastValidConfiguration.scheduling.affinity.podAffinity.requiredDuringSchedulingIgnoredDuringExecution.labelSelector.matchLabels

                объект

                matchLabels is a map of {key,value} pairs. A single {key,value} in the matchLabels map is equivalent to an element of matchExpressions, whose key field is “key”, the operator is “In”, and the values array contains only “value”. The requirements are ANDed.
            • status.lastValidConfiguration.scheduling.affinity.podAffinity.requiredDuringSchedulingIgnoredDuringExecution.matchLabelKeys

              массив строк

              MatchLabelKeys is a set of pod label keys to select which pods will be taken into consideration. The keys are used to lookup values from the incoming pod labels, those key-value labels are merged with labelSelector as key in (value) to select the group of existing pods which pods will be taken into consideration for the incoming pod’s pod (anti) affinity. Keys that don’t exist in the incoming pod labels will be ignored. The default value is empty. The same key is forbidden to exist in both matchLabelKeys and labelSelector. Also, matchLabelKeys cannot be set when labelSelector isn’t set.
            • status.lastValidConfiguration.scheduling.affinity.podAffinity.requiredDuringSchedulingIgnoredDuringExecution.mismatchLabelKeys

              массив строк

              MismatchLabelKeys is a set of pod label keys to select which pods will be taken into consideration. The keys are used to lookup values from the incoming pod labels, those key-value labels are merged with labelSelector as key notin (value) to select the group of existing pods which pods will be taken into consideration for the incoming pod’s pod (anti) affinity. Keys that don’t exist in the incoming pod labels will be ignored. The default value is empty. The same key is forbidden to exist in both mismatchLabelKeys and labelSelector. Also, mismatchLabelKeys cannot be set when labelSelector isn’t set.
            • status.lastValidConfiguration.scheduling.affinity.podAffinity.requiredDuringSchedulingIgnoredDuringExecution.namespaceSelector

              объект

              A label query over the set of namespaces that the term applies to. The term is applied to the union of the namespaces selected by this field and the ones listed in the namespaces field. null selector and null or empty namespaces list means “this pod’s namespace”. An empty selector ({}) matches all namespaces.
              • status.lastValidConfiguration.scheduling.affinity.podAffinity.requiredDuringSchedulingIgnoredDuringExecution.namespaceSelector.matchExpressions

                массив объектов

                matchExpressions is a list of label selector requirements. The requirements are ANDed.
                • status.lastValidConfiguration.scheduling.affinity.podAffinity.requiredDuringSchedulingIgnoredDuringExecution.namespaceSelector.matchExpressions.key

                  строка

                  key is the label key that the selector applies to.
                • status.lastValidConfiguration.scheduling.affinity.podAffinity.requiredDuringSchedulingIgnoredDuringExecution.namespaceSelector.matchExpressions.operator

                  строка

                  operator represents a key’s relationship to a set of values. Valid operators are In, NotIn, Exists and DoesNotExist.
                • status.lastValidConfiguration.scheduling.affinity.podAffinity.requiredDuringSchedulingIgnoredDuringExecution.namespaceSelector.matchExpressions.values

                  массив строк

                  values is an array of string values. If the operator is In or NotIn, the values array must be non-empty. If the operator is Exists or DoesNotExist, the values array must be empty. This array is replaced during a strategic merge patch.
              • status.lastValidConfiguration.scheduling.affinity.podAffinity.requiredDuringSchedulingIgnoredDuringExecution.namespaceSelector.matchLabels

                объект

                matchLabels is a map of {key,value} pairs. A single {key,value} in the matchLabels map is equivalent to an element of matchExpressions, whose key field is “key”, the operator is “In”, and the values array contains only “value”. The requirements are ANDed.
            • status.lastValidConfiguration.scheduling.affinity.podAffinity.requiredDuringSchedulingIgnoredDuringExecution.namespaces

              массив строк

              namespaces specifies a static list of namespace names that the term applies to. The term is applied to the union of the namespaces listed in this field and the ones selected by namespaceSelector. null or empty namespaces list and null namespaceSelector means “this pod’s namespace”.
            • status.lastValidConfiguration.scheduling.affinity.podAffinity.requiredDuringSchedulingIgnoredDuringExecution.topologyKey

              строка

              This pod should be co-located (affinity) or not co-located (anti-affinity) with the pods matching the labelSelector in the specified namespaces, where co-located is defined as running on a node whose value of the label with key topologyKey matches that of any node on which any of the selected pods is running. Empty topologyKey is not allowed.
        • status.lastValidConfiguration.scheduling.affinity.podAntiAffinity

          объект

          Describes pod anti-affinity scheduling rules (e.g. avoid putting this pod in the same node, zone, etc. as some other pod(s)).
          • status.lastValidConfiguration.scheduling.affinity.podAntiAffinity.preferredDuringSchedulingIgnoredDuringExecution

            массив объектов

            The scheduler will prefer to schedule pods to nodes that satisfy the anti-affinity expressions specified by this field, but it may choose a node that violates one or more of the expressions. The node that is most preferred is the one with the greatest sum of weights, i.e. for each node that meets all of the scheduling requirements (resource request, requiredDuringScheduling anti-affinity expressions, etc.), compute a sum by iterating through the elements of this field and subtracting “weight” from the sum if the node has pods which matches the corresponding podAffinityTerm; the node(s) with the highest sum are the most preferred.
            • status.lastValidConfiguration.scheduling.affinity.podAntiAffinity.preferredDuringSchedulingIgnoredDuringExecution.podAffinityTerm

              объект

              Required. A pod affinity term, associated with the corresponding weight.
              • status.lastValidConfiguration.scheduling.affinity.podAntiAffinity.preferredDuringSchedulingIgnoredDuringExecution.podAffinityTerm.labelSelector

                объект

                A label query over a set of resources, in this case pods. If it’s null, this PodAffinityTerm matches with no Pods.
                • status.lastValidConfiguration.scheduling.affinity.podAntiAffinity.preferredDuringSchedulingIgnoredDuringExecution.podAffinityTerm.labelSelector.matchExpressions

                  массив объектов

                  matchExpressions is a list of label selector requirements. The requirements are ANDed.
                  • status.lastValidConfiguration.scheduling.affinity.podAntiAffinity.preferredDuringSchedulingIgnoredDuringExecution.podAffinityTerm.labelSelector.matchExpressions.key

                    строка

                    key is the label key that the selector applies to.
                  • status.lastValidConfiguration.scheduling.affinity.podAntiAffinity.preferredDuringSchedulingIgnoredDuringExecution.podAffinityTerm.labelSelector.matchExpressions.operator

                    строка

                    operator represents a key’s relationship to a set of values. Valid operators are In, NotIn, Exists and DoesNotExist.
                  • status.lastValidConfiguration.scheduling.affinity.podAntiAffinity.preferredDuringSchedulingIgnoredDuringExecution.podAffinityTerm.labelSelector.matchExpressions.values

                    массив строк

                    values is an array of string values. If the operator is In or NotIn, the values array must be non-empty. If the operator is Exists or DoesNotExist, the values array must be empty. This array is replaced during a strategic merge patch.
                • status.lastValidConfiguration.scheduling.affinity.podAntiAffinity.preferredDuringSchedulingIgnoredDuringExecution.podAffinityTerm.labelSelector.matchLabels

                  объект

                  matchLabels is a map of {key,value} pairs. A single {key,value} in the matchLabels map is equivalent to an element of matchExpressions, whose key field is “key”, the operator is “In”, and the values array contains only “value”. The requirements are ANDed.
              • status.lastValidConfiguration.scheduling.affinity.podAntiAffinity.preferredDuringSchedulingIgnoredDuringExecution.podAffinityTerm.matchLabelKeys

                массив строк

                MatchLabelKeys is a set of pod label keys to select which pods will be taken into consideration. The keys are used to lookup values from the incoming pod labels, those key-value labels are merged with labelSelector as key in (value) to select the group of existing pods which pods will be taken into consideration for the incoming pod’s pod (anti) affinity. Keys that don’t exist in the incoming pod labels will be ignored. The default value is empty. The same key is forbidden to exist in both matchLabelKeys and labelSelector. Also, matchLabelKeys cannot be set when labelSelector isn’t set.
              • status.lastValidConfiguration.scheduling.affinity.podAntiAffinity.preferredDuringSchedulingIgnoredDuringExecution.podAffinityTerm.mismatchLabelKeys

                массив строк

                MismatchLabelKeys is a set of pod label keys to select which pods will be taken into consideration. The keys are used to lookup values from the incoming pod labels, those key-value labels are merged with labelSelector as key notin (value) to select the group of existing pods which pods will be taken into consideration for the incoming pod’s pod (anti) affinity. Keys that don’t exist in the incoming pod labels will be ignored. The default value is empty. The same key is forbidden to exist in both mismatchLabelKeys and labelSelector. Also, mismatchLabelKeys cannot be set when labelSelector isn’t set.
              • status.lastValidConfiguration.scheduling.affinity.podAntiAffinity.preferredDuringSchedulingIgnoredDuringExecution.podAffinityTerm.namespaceSelector

                объект

                A label query over the set of namespaces that the term applies to. The term is applied to the union of the namespaces selected by this field and the ones listed in the namespaces field. null selector and null or empty namespaces list means “this pod’s namespace”. An empty selector ({}) matches all namespaces.
                • status.lastValidConfiguration.scheduling.affinity.podAntiAffinity.preferredDuringSchedulingIgnoredDuringExecution.podAffinityTerm.namespaceSelector.matchExpressions

                  массив объектов

                  matchExpressions is a list of label selector requirements. The requirements are ANDed.
                  • status.lastValidConfiguration.scheduling.affinity.podAntiAffinity.preferredDuringSchedulingIgnoredDuringExecution.podAffinityTerm.namespaceSelector.matchExpressions.key

                    строка

                    key is the label key that the selector applies to.
                  • status.lastValidConfiguration.scheduling.affinity.podAntiAffinity.preferredDuringSchedulingIgnoredDuringExecution.podAffinityTerm.namespaceSelector.matchExpressions.operator

                    строка

                    operator represents a key’s relationship to a set of values. Valid operators are In, NotIn, Exists and DoesNotExist.
                  • status.lastValidConfiguration.scheduling.affinity.podAntiAffinity.preferredDuringSchedulingIgnoredDuringExecution.podAffinityTerm.namespaceSelector.matchExpressions.values

                    массив строк

                    values is an array of string values. If the operator is In or NotIn, the values array must be non-empty. If the operator is Exists or DoesNotExist, the values array must be empty. This array is replaced during a strategic merge patch.
                • status.lastValidConfiguration.scheduling.affinity.podAntiAffinity.preferredDuringSchedulingIgnoredDuringExecution.podAffinityTerm.namespaceSelector.matchLabels

                  объект

                  matchLabels is a map of {key,value} pairs. A single {key,value} in the matchLabels map is equivalent to an element of matchExpressions, whose key field is “key”, the operator is “In”, and the values array contains only “value”. The requirements are ANDed.
              • status.lastValidConfiguration.scheduling.affinity.podAntiAffinity.preferredDuringSchedulingIgnoredDuringExecution.podAffinityTerm.namespaces

                массив строк

                namespaces specifies a static list of namespace names that the term applies to. The term is applied to the union of the namespaces listed in this field and the ones selected by namespaceSelector. null or empty namespaces list and null namespaceSelector means “this pod’s namespace”.
              • status.lastValidConfiguration.scheduling.affinity.podAntiAffinity.preferredDuringSchedulingIgnoredDuringExecution.podAffinityTerm.topologyKey

                строка

                Обязательный параметр

                This pod should be co-located (affinity) or not co-located (anti-affinity) with the pods matching the labelSelector in the specified namespaces, where co-located is defined as running on a node whose value of the label with key topologyKey matches that of any node on which any of the selected pods is running. Empty topologyKey is not allowed.
            • status.lastValidConfiguration.scheduling.affinity.podAntiAffinity.preferredDuringSchedulingIgnoredDuringExecution.weight

              целочисленный

              weight associated with matching the corresponding podAffinityTerm, in the range 1-100.
          • status.lastValidConfiguration.scheduling.affinity.podAntiAffinity.requiredDuringSchedulingIgnoredDuringExecution

            массив объектов

            If the anti-affinity requirements specified by this field are not met at scheduling time, the pod will not be scheduled onto the node. If the anti-affinity requirements specified by this field cease to be met at some point during pod execution (e.g. due to a pod label update), the system may or may not try to eventually evict the pod from its node. When there are multiple elements, the lists of nodes corresponding to each podAffinityTerm are intersected, i.e. all terms must be satisfied.
            • status.lastValidConfiguration.scheduling.affinity.podAntiAffinity.requiredDuringSchedulingIgnoredDuringExecution.labelSelector

              объект

              A label query over a set of resources, in this case pods. If it’s null, this PodAffinityTerm matches with no Pods.
              • status.lastValidConfiguration.scheduling.affinity.podAntiAffinity.requiredDuringSchedulingIgnoredDuringExecution.labelSelector.matchExpressions

                массив объектов

                matchExpressions is a list of label selector requirements. The requirements are ANDed.
                • status.lastValidConfiguration.scheduling.affinity.podAntiAffinity.requiredDuringSchedulingIgnoredDuringExecution.labelSelector.matchExpressions.key

                  строка

                  key is the label key that the selector applies to.
                • status.lastValidConfiguration.scheduling.affinity.podAntiAffinity.requiredDuringSchedulingIgnoredDuringExecution.labelSelector.matchExpressions.operator

                  строка

                  operator represents a key’s relationship to a set of values. Valid operators are In, NotIn, Exists and DoesNotExist.
                • status.lastValidConfiguration.scheduling.affinity.podAntiAffinity.requiredDuringSchedulingIgnoredDuringExecution.labelSelector.matchExpressions.values

                  массив строк

                  values is an array of string values. If the operator is In or NotIn, the values array must be non-empty. If the operator is Exists or DoesNotExist, the values array must be empty. This array is replaced during a strategic merge patch.
              • status.lastValidConfiguration.scheduling.affinity.podAntiAffinity.requiredDuringSchedulingIgnoredDuringExecution.labelSelector.matchLabels

                объект

                matchLabels is a map of {key,value} pairs. A single {key,value} in the matchLabels map is equivalent to an element of matchExpressions, whose key field is “key”, the operator is “In”, and the values array contains only “value”. The requirements are ANDed.
            • status.lastValidConfiguration.scheduling.affinity.podAntiAffinity.requiredDuringSchedulingIgnoredDuringExecution.matchLabelKeys

              массив строк

              MatchLabelKeys is a set of pod label keys to select which pods will be taken into consideration. The keys are used to lookup values from the incoming pod labels, those key-value labels are merged with labelSelector as key in (value) to select the group of existing pods which pods will be taken into consideration for the incoming pod’s pod (anti) affinity. Keys that don’t exist in the incoming pod labels will be ignored. The default value is empty. The same key is forbidden to exist in both matchLabelKeys and labelSelector. Also, matchLabelKeys cannot be set when labelSelector isn’t set.
            • status.lastValidConfiguration.scheduling.affinity.podAntiAffinity.requiredDuringSchedulingIgnoredDuringExecution.mismatchLabelKeys

              массив строк

              MismatchLabelKeys is a set of pod label keys to select which pods will be taken into consideration. The keys are used to lookup values from the incoming pod labels, those key-value labels are merged with labelSelector as key notin (value) to select the group of existing pods which pods will be taken into consideration for the incoming pod’s pod (anti) affinity. Keys that don’t exist in the incoming pod labels will be ignored. The default value is empty. The same key is forbidden to exist in both mismatchLabelKeys and labelSelector. Also, mismatchLabelKeys cannot be set when labelSelector isn’t set.
            • status.lastValidConfiguration.scheduling.affinity.podAntiAffinity.requiredDuringSchedulingIgnoredDuringExecution.namespaceSelector

              объект

              A label query over the set of namespaces that the term applies to. The term is applied to the union of the namespaces selected by this field and the ones listed in the namespaces field. null selector and null or empty namespaces list means “this pod’s namespace”. An empty selector ({}) matches all namespaces.
              • status.lastValidConfiguration.scheduling.affinity.podAntiAffinity.requiredDuringSchedulingIgnoredDuringExecution.namespaceSelector.matchExpressions

                массив объектов

                matchExpressions is a list of label selector requirements. The requirements are ANDed.
                • status.lastValidConfiguration.scheduling.affinity.podAntiAffinity.requiredDuringSchedulingIgnoredDuringExecution.namespaceSelector.matchExpressions.key

                  строка

                  key is the label key that the selector applies to.
                • status.lastValidConfiguration.scheduling.affinity.podAntiAffinity.requiredDuringSchedulingIgnoredDuringExecution.namespaceSelector.matchExpressions.operator

                  строка

                  operator represents a key’s relationship to a set of values. Valid operators are In, NotIn, Exists and DoesNotExist.
                • status.lastValidConfiguration.scheduling.affinity.podAntiAffinity.requiredDuringSchedulingIgnoredDuringExecution.namespaceSelector.matchExpressions.values

                  массив строк

                  values is an array of string values. If the operator is In or NotIn, the values array must be non-empty. If the operator is Exists or DoesNotExist, the values array must be empty. This array is replaced during a strategic merge patch.
              • status.lastValidConfiguration.scheduling.affinity.podAntiAffinity.requiredDuringSchedulingIgnoredDuringExecution.namespaceSelector.matchLabels

                объект

                matchLabels is a map of {key,value} pairs. A single {key,value} in the matchLabels map is equivalent to an element of matchExpressions, whose key field is “key”, the operator is “In”, and the values array contains only “value”. The requirements are ANDed.
            • status.lastValidConfiguration.scheduling.affinity.podAntiAffinity.requiredDuringSchedulingIgnoredDuringExecution.namespaces

              массив строк

              namespaces specifies a static list of namespace names that the term applies to. The term is applied to the union of the namespaces listed in this field and the ones selected by namespaceSelector. null or empty namespaces list and null namespaceSelector means “this pod’s namespace”.
            • status.lastValidConfiguration.scheduling.affinity.podAntiAffinity.requiredDuringSchedulingIgnoredDuringExecution.topologyKey

              строка

              This pod should be co-located (affinity) or not co-located (anti-affinity) with the pods matching the labelSelector in the specified namespaces, where co-located is defined as running on a node whose value of the label with key topologyKey matches that of any node on which any of the selected pods is running. Empty topologyKey is not allowed.
      • status.lastValidConfiguration.scheduling.nodeSelector

        объект
      • status.lastValidConfiguration.scheduling.tolerations

        массив объектов
        • status.lastValidConfiguration.scheduling.tolerations.effect

          строка

          Effect indicates the taint effect to match. Empty means match all taint effects. When specified, allowed values are NoSchedule, PreferNoSchedule and NoExecute.
        • status.lastValidConfiguration.scheduling.tolerations.key

          строка

          Key is the taint key that the toleration applies to. Empty means match all taint keys. If the key is empty, operator must be Exists; this combination means to match all values and all keys.
        • status.lastValidConfiguration.scheduling.tolerations.operator

          строка

          Operator represents a key’s relationship to the value. Valid operators are Exists, Equal, Lt, and Gt. Defaults to Equal. Exists is equivalent to wildcard for value, so that a pod can tolerate all taints of a particular category. Lt and Gt perform numeric comparisons (requires feature gate TaintTolerationComparisonOperators).
        • status.lastValidConfiguration.scheduling.tolerations.tolerationSeconds

          целочисленный

          TolerationSeconds represents the period of time the toleration (which must be of effect NoExecute, otherwise this field is ignored) tolerates the taint. By default, it is not set, which means tolerate the taint forever (do not evict). Zero and negative values will be treated as 0 (evict immediately) by the system.
        • status.lastValidConfiguration.scheduling.tolerations.value

          строка

          Value is the taint value the toleration matches to. If the operator is Exists, the value should be empty, otherwise just a regular string.
      • status.lastValidConfiguration.scheduling.warnings

        массив строк
  • status.lastValidatedConfigurationHash

    строка

    Хеш последней конфигурации, прошедшей валидацию